Monitoring The Calling-Station-Id Radius Attribute; Monitoring The Nas-Identifier Radius Attribute; Monitoring The Format Of The Remote-Circuit-Id For Radius - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Related Topics

Monitoring the Calling-Station-Id RADIUS Attribute

Purpose
Action
Related Topics

Monitoring the NAS-Identifier RADIUS Attribute

Purpose
Action
Related Topics

Monitoring the Format of the Remote-Circuit-ID for RADIUS

Purpose
Copyright © 2010, Juniper Networks, Inc.
host1#show radius pppoe nas-port-format
unique
To display the status of the S-VLAN ID setting for the NAS-Port attribute for VLAN
interfaces:
host1#show radius vlan nas-port-format
vlan stacked
show radius nas-port-format
show radius nas-port-format extended
show radius pppoe nas-port-format
show radius vlan nas-port-format
Display the format and delimiter used for the Calling-Station-Id [31] attribute.
To display the format configured for the Calling-Station-Id [31] attribute:
host1#show radius calling-station-format
fixed-format-adapter-new-field (includes SVLAN ID)
To display the delimiter used in the Calling-Station-Id for authenticated ATM PPP users:
host1#show radius calling-station-delimiter
&
show radius calling-station-format
show radius calling-station-delimiter
Display information about the NAS-Identifier value.
To display information about the NAS-Identifier value:
host1#show radius nas-identifier
fox
show radius nas-identifier
Display the format configured for the PPPoE remote circuit ID value captured from a
DSLAM.
The default format is agent-circuit-ID. If the PPPoE remote circuit ID value is configured
to include any or all of the agent-circuit-id, agent-remote-id, and nas-identifier
components, the display lists the components included and the order in which they
appear.
Chapter 8: Monitoring RADIUS
299