JunosE 11.2.x Broadband Access Configuration Guide
Action
Related Topics
Monitoring the Delimiter Character in the Remote-Circuit-ID for RADIUS
Purpose
Action
Related Topics
Monitoring the Acct-Session-Id RADIUS Attribute
Purpose
Action
Related Topics
Monitoring the DSL-Port-Type RADIUS Attribute
Purpose
Action
Related Topics
300
If the PPPoE remote circuit ID value is configured to use the format for the dsl-forum-1
keyword of "radius remote-circuit-id-format" on page 196 , the display indicates that this
format is in effect.
To display the format configured for the PPPoE remote circuit ID value captured from a
DSLAM:
host1#show radius remote-circuit-id-format
nas-identifier agent-circuit-id agent-remote-id
[32] NAS-Identifier on page 195
show radius remote-circuit-id-format
Display the delimiter character configured to set off components in the PPPoE remote
circuit ID value captured from a DSLAM. The default delimiter character is #.
To display the delimiter character:
host1#show radius remote-circuit-id-delimiter
!
show radius remote-circuit-id-delimiter
Display the format used for the Acct-Session-Id attribute.
To display the format used for the Acct-Session-Id attribute:
host1#show radius acct-session-id-format
decimal
show radius acct-session-id-format
Display the DSL port type for NAS-Port-Type attribute for ATM and Ethernet users.
To display the DSL port type for NAS-Port-Type attribute for ATM users:
host1#show radius dsl-port-type
xdsl
To display the NAS-Port-Type attribute for Ethernet interfaces:
host1#show radius ethernet-port-type
virtual
show radius dsl-port-type
show radius ethernet-port-type
Copyright © 2010, Juniper Networks, Inc.