Example: Vrrp Configuration Without The Real Address Owner; Figure 7: Commonly Used Vrrp Configuration - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Related
Documentation

Example: VRRP Configuration Without the Real Address Owner

Copyright © 2010, Juniper Networks, Inc.

Figure 7: Commonly Used VRRP Configuration

VRRP Overview on page 149
VRRP Implementation in E Series Routers on page 152
VRRP Router Election Rules on page 152
Before You Configure VRRP on page 156
Configuring VRRP on page 157
Figure 8 on page 156 is noticeably similar to Figure 7 on page 155 except that the addresses
configured by the VRIDs have no real owner. Consequently, both routers R1 and R2 are
configured as backup routers for VRID 1, VRID 2, VRID 3, and VRID 4.
Chapter 6: Configuring VRRP
155