Ntp Server - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

ntp server

ntp server ipAddress [ version number ] [ prefer ]
Syntax
[ source interfaceType interfaceSpecifier ]
no ntp server ipAddress
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies an NTP server for time synchronization. The source option for this command
Description
overrides the ntp source command. The no version terminates NTP communications
between this server and the interface.
Options
Global Configuration
Mode
104
ntp server
ipAddress IP address of the NTP server
number Value from 1 to 4; indicates the version of the NTP software on the
server
prefer Indicates that this server is the first choice for time synchronization
source Directs responses from the NTP server to a specific interface on the
router; overrides the ntp source command
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5