System Config > Licensing; Figure 52 System Config > Ntp Page Detail (Add New Ntp Server); Figure 53 System Config > License Page Detail (Installed Licenses) - Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Manager Administrator's Guide
Add New NTP Server
Enter NTP server IP address, version, and enable/disable. See
Figure 52 System Config > NTP Page Detail (Add New NTP Server)
System Config > Licensing
Use this page to view and remove installed licenses, and add new licenses.
Installed Licenses
View and Remove licenses. See
Figure 53 System Config > License Page Detail (Installed Licenses)
Add New License(s)
Use this area to manually enter a license key. See
CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 53 for graphic.
Figure 54
Figure 52, next.
for graphic.
System Config 65