Domain-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

domain-id

Syntax
Release Information
Description
Options
Mode
536
domain-id domainIdAddress | domainId
no domain-id
Command introduced before JunosE Release 7.1.0.
Sets the OSPF domain ID for an OSPF VRF on a PE. The no version restores the default
value.
domainIdAddress—OSPF domain ID in IP address format; default value is the IP address
of the OSPF router configured in the VRF
domainId—OSPF domain ID as an integer value in the range 0–4294967295; default
value is 0
When the domainid is zero, MP-BGP does not attach an OSPF domain identifier attribute
when it converts an OSPF route to an MP-BGP route to cross the BGP/MPLS VPN.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.