Domain-Id; Domain-Vpn-Tag - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

domain-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

domain-vpn-tag

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2010
®
OS for EX Series Ethernet Switches, Release 10.4
domain-id domain-id;
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify a domain ID for a route. The domain ID identifies the OSPF domain from which
the route originated.
—You can specify either an IP address or an IP address and a local identifier
domain-id
using the following format:
identifier with the IP address, the identifier is assumed to have a value of 0.
Default: If the router ID is not configured in the routing instance, the router ID is derived
from an interface address belonging to the routing instance.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Domain IDs for VPNs
domain-vpn-tag number;
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Set a virtual private network (VPN) tag for OSPFv2 external routes generated by the
provider edge (PE) router.
number —VPN tag.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Domain IDs for VPNs
. If you do not specify a local
ip-address:local-identifier
Copyright © 2010, Juniper Networks, Inc.