Show Mac-Retention Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Chassis MAC Server (CMS) Commands

show mac-retention status

Displays the MAC retention status.
show mac-retention status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855-U24X
Usage Guidelines
•
If the administrative status of MAC retention is not configured, it will be displayed as disabled by
default.
•
If the administrative status of the duplicate MAC address trap is not configured, it will be displayed as
disabled by default.
•
If the source of the currently used MAC address is not configured, it will be displayed as EEPROM by
default.
Examples
show mac-retention status
->
MAC RETENTION STATUS
==============================================================================
Admin State
Trap admin state
Current MAC address : 00:0a:0b:0c:0d:0e
MAC address source
Topology Status
output definitions
Admin State
Trap admin state
Current MAC address
MAC address source
Topology Status
OmniSwitch CLI Reference Guide
: Enabled
: Enabled
: Retained
: Ring present
Displays the administrative status of MAC retention (Enabled or Dis-
abled).
Displays the administrative status of the duplicate MAC address trap
(Enabled or Disabled).
Displays the MAC address currently used by the switch.
Displays the source of the currently used MAC address. Options
include EEPROM and Retained.
Displays the topology status of the stack. Options include Ring present
and Ring Not Present.
June 2012 page 55-11