Ntp Server Unsynchronized - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Network Time Protocol Commands

ntp server unsynchronized

Disables an NTP client from invoking tests for NTP server synchronization. This allows the NTP client to
synchronize with unsynchronized NTP servers in the network.
ntp server unsynchronized
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
When NTP peer synchronization tests are disabled, the NTP client is able to synchronize with either an
NTP peer that is not synchronized with an atomic clock or a network of NTP servers that will finally
synchronize with an atomic clock.
Examples
-> ntp server unsynchronized
Release History
Release 6.1.5; command was introduced.
Related Commands
ntp server synchronized
MIB Objects
alaNtpConfig
alaNtpPeerTests
OmniSwitch CLI Reference Guide
Enables an NTP client to invoke tests for NTP server synchronization as
specified by the NTP protocol.
June 2012 page 56-5