Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3430

output definitions (continued)
Application
Id
Release History
Release 6.1; command was introduced.
Related Commands
mac-range eeprom
MIB Objects
ChasMacAddressAllocTable
chasAppId
chasObjectId
chasAllocMacRangeIndex
chasAllocMacAddress
page 55-10
The application for which the allocated MAC address is being used.
Current options include VLAN, 802.1X, and CHASSIS. VLAN refers
to MAC addresses allocated to VLAN router ports in multiple MAC
router mode. CHASSIS refers to MAC addresses used for the base
chassis MAC address and the Ethernet Management Port (EMP).
An ID number used to identify an allocated MAC address. ID numbers
are used for the base chassis MAC address and Ethernet Management
Port (EMP), as well as VLAN router ports. The ID value 0 is reserved
for the switch's base chassis MAC address. The ID value 1 is reserved
for the EMP MAC address. Router ports assigned to VLANs 2 through
4094 are given corresponding MAC IDs. For example, a router port
configured on VLAN 44 receives an allocated MAC ID of 44. Because
default VLAN 1 router ports use the base chassis MAC address by
default, any router port configured on VLAN 1 is assigned the ID
value 0.
Modifies the default MAC range on the switch's EEPROM.
Chassis MAC Server (CMS) Commands
OmniSwitch CLI Reference Guide June 2012