Running the Gateway Installation Wizard (GIW)
Connecting a USB modem
1. Connect a USB modem to a working telephone line.
Note:
See
Note:
USB modems.
2. Connect one end of a USB cable to the modem.
3. Connect the other end of the USB cable to the USB port on the G350 front panel.
Test the modem connection
If the modem is successfully initialized, the MDM LED on the G350 front panel lights.
Testing the modem
If you connected a modem, verify that the MDM LED is lit, and then dial into the modem to
check that you can authenticate to the modem.
144 Installation and Upgrades for the Avaya G350 Media Gateway
USB modems supported by the G350
on page 136 for a list of supported