Chapter 13 - Trap Managers Configuration; Trap Manager Overview - Avaya G350 User Manual

13

Trap Manager Overview

Avaya G350 Manager User Guide
Trap Managers Configuration
This chapter provides the information and instructions for configuring
managers for the Avaya G350 Device. It includes the following topics:
• Trap Manager
• Viewing the Device Trap Managers Table
accessing the device's Trap Managers Table, and a description of
the Trap Managers Table.
• Editing the Trap Managers
the Trap Managers Table.
In the event of a fault or an unusual occurrence, the Avaya G350 can
send traps to one or more Network Management Stations (NMS). To
enable this feature, you must configure the Avaya G350 with a list of the
managers' workstations. Traps are then sent to the stations listed in the
Managers table.
* Note: Up to nine managers can be assigned per device. However, it
is recommended to keep the list limited to actual and
relevant managers so as not to place undue stress on the
network.
Using the Trap Managers Table, you can also configure which traps are
sent to specific managers. The columns to the right of the managers' IP
addresses represent specific traps. Checking the checkbox in a trap
column enables the manager to receive the checked trap. Managers only
receive the traps which are checked.
Overview- An overview of trap managers.
Table- Instructions on how to edit
- Instructions on
149