Creating A Hybrid Cloud For Client Access - Avaya Aura Deployment Manual

23. (Optional) Click the Actions menu to change the instance state.
For example, you can start, stop, or reboot the AMI virtual machine.
Next steps
To complete the first-login configuration, log in using admin@Instance.hostname or
admin@instance_IP as the login credentials are not provided. Accept the license agreement
and set the password.
Expanding an existing cluster
About this task
An existing AWS cluster can be expanded with additional nodes by updating the stack that
represents the cluster.
Note:
You cannot expand a single AWS node into an AWS cluster. You must create AWS clusters
from the beginning.
Procedure
Add nodes to a cluster by updating the CloudFormation stack that represents the cluster.

Creating a hybrid cloud for client access

About this task
Servers deployed in AWS are contained within a Virtual Private Cloud (VPC). End user clients are
present within a separate network but require access to the servers in AWS. You must create a
VPN to enable client access.
You must configure VPN gateways at both ends of the tunnel:
• The address range assigned to the VPC must route to the gateway on your side of the
tunnel.
• Within AWS, the address range that clients use must route to the AWS-side gateway.
Use this procedure to configure AWS so that the address range that clients use routes to the
AWS-side of the gateway.
Before you begin
• Deploy the required EC2 instances.
• Assign an IP address range to the VPC that does not overlap with any subnet in your
network.
Procedure
1. Sign in to the AWS console.
2. Navigate to Services > Management Tools > CloudFormation and select the required
stack.
October 2018 Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
Amazon Web Services deployments
®
Web Gateway 59