Configuring Users; Modifying The Administrator Account User Name - Avaya Advanced Gateway 2330 Manual

Basic CLI operations
Procedure steps
To configure the gateway from a terminal, enter:
configure terminal

Configuring users

Configure additional usernames and passwords to provide access to the AG2330 to others.
To configure users, you must log in with level 1 user privileges using the administrator
account.
You can configure any new user to have a user privilege level from 2 to 4. The administrator
account is the only account that has level 1 privileges.
Procedure steps
1. To enter the configuration mode, enter:
2. To create a user, enter:
3. Enter the password.
4. Reenter the password.

Modifying the administrator account user name

Modify the administrator account user name.
To modify the administrator user name, you must log in with level 1 user privileges using the
administrator account (default user name is admin and password is setup).
22 Using the Command Line Interface
configure terminal
user <user-name> [<user-level>]
The system prompts you to enter a password:
Please enter new password:
The system prompts you to confirm the password:
Please re-enter password:
The system provides a system message confirming that the user has been added:
password is set user is added
Comments? infodev@avaya.com
August 2013