Set Ppp Incoming Timeout - Avaya W310 Command Reference Manual

Example:
W310-1(super)# set ppp chap secret hush
PPP shared secret for CHAP authentication is set

set ppp incoming timeout

User level: privileged, supervisor.
Use the set ppp incoming timeout command to set the number of minutes until the
system automatically disconnects an idle PPP incoming session.
Syntax:
The syntax for this command is:
set ppp incoming timeout <time>
Syntax
<time>
Example:
W310-1# set ppp incoming timeout 15
PPP incoming session will automatically disconnect after 15
minutes of idle time
Related Commands:
• Use this
that a PPP session can remain idle before being automatically disconnected.
• Use the
Avaya W310 Command Reference Guide
Description
The timeout in minutes
show ppp incoming timeout
show ppp configuration
command to display the time in minutes
command to display the ppp configuration.
Chapter 4
45