Table of Contents
Advertisement
Idle Timeout
The VPN Gateway will disconnect your local console connection or remote connection (Telnet
or SSH) after 10 minutes of inactivity. This value can be changed to a maximum value of 1
hour using the /cfg/sys/adm/clitimeout command.
If you have unapplied configuration changes when automatically disconnected after the
specified idle timeout value, the unapplied configuration changes will be lost. Therefore, make
sure to save your configuration changes regularly by using the global apply command.
If you have unapplied configuration changes when using the global exit command to log out
from the command line interface, you will be prompted to view the pending configuration
changes by using the global diff command. After verifying the pending configuration
changes, you can either remove the changes or apply them. For more information about
pending configuration changes, see the "Viewing, Applying and Removing Changes " section
under Configuration Menu in the Command Reference.
User Guide
Idle Timeout
April 2013
129
Advertisement
Table of Contents
