Sntp Server; Sntp Timeout - Avaya 2330 Reference Manual

Commissioning commands
Syntax
show telnet
Example
AG# show telnet

sntp server

The Simple Network Time Protocol (SNTP) synchronizes the internal clocks of various network
devices across large, diverse networks to universal standard time.
Use this command to configure the location of the SNTP server.
Syntax
sntp server {ipaddr|hostname}
Table 22: Variable definitions
Variable
{ipaddr|hostname}
Example
AG/configure# sntp server 11.12.13.14

sntp timeout

Use this command to set the timeout value for the response from the server.
Syntax
sntp timeout <value>
Table 23: Variable definitions
Variable
<value>
Example
AG/configure# sntp timeout 500
56 Command Line Reference
Value
The IP address or host name of the
broadcast server. The default value is any
broadcast server.
Value
The timeout value in seconds. The default
timeout value is 1024 seconds.
Comments? infodev@avaya.com
August 2013