Ppp Timeout Ncp - Avaya G450 Cli Reference Manual

CLI Commands

ppp timeout ncp

Use the ppp timeout ncp command to set the maximum time, in seconds, that PPP allows
for negotiation of a network layer protocol. If no network protocol is negotiated within the given
time, the connection is terminated. Use the no form of the command to disable the timeout
feature.
Syntax
[no] ppp timeout ncp seconds
Parameters
Parameter
seconds
User Level
read-write
Context
Interface: Console, FastEthernet (PPP L2, PPP L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3,
USP PPP L2, USP PPP L2-L3), Dialer (L2, L2-L3), USB-modem
Example
To specify that PPP will allow 60 seconds for negotiation of a network protocol:
G450-001(super)# ppp timeout ncp 60
Related Commands
encapsulation,
814 Avaya G450 CLI Reference
Description
The time in seconds that PPP allows for
negotiation of a network layer protocol
ip address, keepalive (PPP), ppp timeout retry,
PPP encapsulation
Possible Default
Values Value
1-65535
show interfaces