jumbo frame
Use 9216 to enable jumbo frames, save config and reboot.
Syntax
<WORD>Enter MTU Limit 1500 or 9216 (default =1500)
Table 20: Variable definitions
Variable
<WORD>
Example
AG/configure#system jumbo-mtu-limit>?
no user
Use this command to remove configured user names from the Advanced Gateway 2330.
Syntax
no user <username>
Example
AG/configure# no user user05
ping
Ping a device to verify the connection between the AG2330 and that network device. If the
network device sends a ping reply, a message indicates that the specified IP address is alive
and can communicate with the gateway. If the gateway does not receive a reply, the message
indicates that the address is not responding.
Syntax
ping <ipaddr>
Table 21: Variable definitions
Variable
Command Line Reference
Value
Specifies the name you want to assign to the
gateway.
Value
jumbo frame
August 2013
53