Place A Test Call; Set Neon Voltage Ring Ping - Avaya CMC1 Installation Manual

17
Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.
18
Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.

Place a Test Call

1
From any telephone connected to a digital line circuit pack, call any nearby telephone connected
to an analog line circuit pack.
2
Verify that the dial tone, ringing pattern, and talk path are acceptable.
3
Place a call through the Central Office (outside call) to any nearby telephone. Verify that the dial
tone, ringing pattern, and talk path are acceptable.
Set Neon Voltage
NOTE:
If the ringing option is set to 50 Hz, neon voltage is not available. If 25 Hz is selected, the
maximum voltage is 120 volts. Refer to
NOTE:
Set the control to OFF if there are no neon message waiting lamps or if LED message
lamps are used. See
Figure 68: Setting the Neon Voltage
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Ring Ping
—
Figure 68.
Completing Installation and Cable Pinouts
Set Ringing Option on page 66.
didmt1 KLC 053097
Place a Test Call
137