Failure Scenarios And Repair Actions - Avaya G250 Installation And Upgrade Manual

Upgrading IP phone configuration and firmware files

Failure scenarios and repair actions

Problem
"Free Application Memory is
xxx MB. Use show
application-memory for
more details"
"Application Memory
reached its limits. Sniffer and
TFTP server application
memory sizes restore to
defaults"
Cannot download file to
Gateway.
"Not enough memory in
RAM"
"Not enough memory in
NVRAM"
"File already Exists in other
Bank"
"TFTP - General failure"
"Can't start upload operation.
Wrong operation parameters
or other operation already in
progress, please try again"
98 Installation and Upgrade for the Avaya G250 Media Gateway
Possible cause
You tried to configure
more memory than is
available in the main
bank.
You configured the total
memory allocations for
applications and Sniffer to
more than 20 Mb in the
startup configuration and
performed a reset.
The remote file is larger
than the available RAM.
The remote file is larger
than the available
NVRAM.
You tried to download the
same file to more than
one bank.
File name or path
incorrect
You are trying to upload a
file from an empty bank.
Action
Reduce the application
memory allocation.
None. The memory
allocations are set to the
default values.
Refer to the specific error
message you receive.
Free more space in the
RAM using the erase
phone-script or
erase phone-image
command.
Free space in the NVRAM
using the erase
phone-script
command.
None. You cannot load
the same file to more than
one bank.
Check the file name and
path.
Upload from a different
bank.
Download a file to the
bank.