Failure Scenarios And Repair Actions - Avaya G430 Deploying And Upgrading

For example:
Gxxx-001(super)# copy ftp phone-imageB pub\def20r1_8_1.bin 192.168.49.10
Username: root
Password:
Beginning download operation ...
This operation may take up to 20 seconds.
Please refrain from any other operation during this time.
For more information , use 'show download phone-image-file status'
command
Result
Note:
Once the upgrade procedure is complete, you can delete the files using the erase phone-
image command.
Related links
TFTP IP telephone upgrade examples

Failure scenarios and repair actions

There are various configuration related problems which will cause the upgrade to fail. The
scenarios can be repaired by readjusting the downloading or configuration settings.
Table 10: Failure scenarios and repair actions
Problem
"Free Application Memory is xxx
MB. Use show application-
memory for more details"
"Application Memory reached its
limits. Sniffer and TFTP server
application memory sizes restore
to defaults"
Cannot download file to Gateway
July 2018
on page 94
Possible cause
You tried to configure more memory
than is available in the main bank.
You tried to download configuration
files after configuring the total
memory allocations for applications
and Sniffer to more than 12 Mb in
the startup configuration and
performing a reset.
Deploying and Upgrading Avaya G430 Branch Gateway
Comments on this document? infodev@avaya.com
Failure scenarios and repair actions
Action
Re-adjust the allocation of
memory between the Sniffer
cache application and the
TFTP server. Be sure the
Sniffer allocation is not needed
for trouble shooting.
None. The memory allocations
are set to the default values.
See the specific error message
you receive.
Table continues...
97