Failure Scenarios And Repair Actions - Avaya G350 Installing And Upgrading

Failure scenarios and repair actions

There are various configuration related problems which will cause the upgrade to fail. The
scenarios can be repaired by readjusting the downloading or configuration settings.
Table 8: Failure scenarios and repair actions
Problem
"Free Application Memory is
xxx MB. Use show
application-memory for
more details"
"Application Memory
reached its limits. Sniffer and
TFTP server application
memory sizes restore to
defaults"
Cannot download file to
Gateway
"Not enough memory in
RAM"
"Not enough memory in
NVRAM"
"File already Exists in other
Bank"
"TFTP - General failure"
"Can't start upload operation.
Wrong operation parameters
or other operation already in
progress, please try again"
Possible cause
You tried to configure more
memory than is available in the
main bank.
You tried to download
configuration files after
configuring the total memory
allocations for applications and
Sniffer to more than 12 Mb in
the startup configuration and
performing a reset.
The remote file is larger than
the available RAM.
The remote file is larger than
the available NVRAM.
You tried to download the
same file to more than one
bank.
File name or path incorrect
You are trying to upload a file
from an empty bank.
Failure scenarios and repair actions
Action
Re-adjust the allocation of
memory between the
Sniffer cache application
and the TFTP server. Be
sure the Sniffer allocation
is not needed for trouble
shooting.
None. The memory
allocations are set to the
default values.
Refer to the specific error
message you receive.
Free more space in the
RAM using the erase
phone-script or
erase phone-image
command.
Free space in the NVRAM
using the erase
phone-script
command.
None. You cannot load
two files with the same
filename to more than one
bank.
Check the file name and
path.
Upload from a different
bank.
Download a file to the
bank.
Issue 4 February 2007 113