Proxy Arp; Ip Proxy-Arp - Avaya G450 Cli Reference Manual

Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, USP PPP L2, USP PPP L2-L3), FastEthernet
(L2, L2-L3) - when traffic shaping is configured, Serial (DS1 FR L2, USP FR L2) - when Frame
Relay Traffic Shaping is not configured, map-class frame-relay, Dialer (L2, L2-L3)
Note:
This command is also used in Serial and WAN FastEthernet context when traffic
Note:
shaping is configured.
Example
To set the maximum query delay to 30 milliseconds:
G450-001(super)# voip-queue-delay 30
Related Commands
priority-queue, queue-limit,

Proxy ARP

ip proxy-arp

Use the ip proxy-arp command to enable proxy ARP on an interface. Use the no form of
this command to disable proxy ARP on an interface.
Syntax
[no] ip proxy-arp
User Level
read-write
Context
interface:FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
Example
To enable proxy ARP on an interface:
G450-001(if:Vlan 1)# ip proxy-arp
show queueing, voip-queue
Proxy ARP
Issue 1 January 2008 837