Running The Automatic Registration Tool (Art) For The Ras Ip Address; Obtaining The Ras Ip Address And Password - Avaya G350 Installing And Upgrading

Before you install
Running the Automatic Registration Tool (ART)
for the RAS IP address
The ART tool is a software tool that generates a remote access (RAS) IP address and
password, for accessing a product attached to a customer's modem. This IP address is
required for configuring remote access to a modem on the S8300 or G350. If you need to
configure remote access to both the G350 and the S8300, follow this procedure twice,
once for the G350 and once for the S8300. For each procedure, a script file is created and
downloaded or emailed to you. You can use the installation script to automatically set up
an IP address and other alarming parameters.
When you run GIW, you will have the opportunity to import the Electronic Planning
Worksheet (EPW). The ART information will be imported along with all the other
information in the EPW. Alternatively, if the G350 will be configured using the CLI, keep the
installation script to run as a CLI command at the configuration stage.
If the G350 will be configured using Gateway Installation Wizard (GIW) or Avaya
Installation Wizard (AIW), and you have an EPW, enter the ART information contained in
the installation script into the EPW.
Note:
You must generate and install a License file and Authentication file for the
Note:
Communication Manager installed on the S8300, before you use the ART tool.
Follow the applicable process to register the system in the Automatic Registration
Tool (ART). Provision the IP Address for S8300 Remote Access with Configure
server by using the Set Modem Interface function. Non-Avaya personnel may
need to contact their service support or customer care center for IP addresses,
depending on entitlements.

Obtaining the RAS IP address and password

1. Access the ART website on your laptop.
2. From the User menu, select Administer an S8xxx, G350, CCS, CVLAN, or ASG
Guard II.
The Enter Network Password dialog box appears.
3. Enter your ART user name and password.
4. Click OK.
The Start of Installation script & IP Addr Admin screen appears.
5. In the FL Number field, enter the customer's FL number.
6. In the Session Type field, select Installation Script Administration.
20 Installation and Upgrades for the Avaya G350 Media Gateway