Run The Automatic Registration Tool (Art) For The Ras Ip Address; Obtaining The Ras Ip Address And Password - Avaya G250 Installing And Upgrading

Before you install
Run the Automatic Registration Tool (ART)
for the RAS IP address
The ART tool is a software tool that generates a remote access (RAS) IP address and
password, for accessing a product attached to a customer's modem. This IP address is required
for configuring remote access to a modem on the S8300 or G250. If you need to configure
remote access to both the G250 and the S8300, follow this procedure twice, once for the G250
and once for the S8300. For each procedure, a script file is created and downloaded or emailed
to you. You can use the installation script to automatically set up an IP address and other
alarming parameters.
When you run GIW, you will have the opportunity to import the EPW. The ART information will
be imported along with all the other information in the EPW. Alternatively, if the G250 will be
configured using the CLI, keep the installation script to run as a CLI command at the
configuration stage.
If the G250 will be configured using Gateway Installation Wizard (GIW) or Avaya Installation
Wizard (Avaya IW), and you have an Electronic Planning Worksheet (EPW), enter the ART
information contained in the installation script into the EPW (see
Preinstallation Worksheet (EPW)
Business Partners call 800-295-0099.
Note:
You must generate and install a License file and Authentication file for the
Note:
Communication Manager installed on the S8300, before you use the ART tool.
Follow the applicable process to register the system in the Automatic Registration
Tool (ART). Provision the IP Address for S8300 Remote Access with Configure
server by using the Set Modem Interface function. Non-Avaya personnel may
need to contact their service support or customer care center for IP addresses,
depending on entitlements.

Obtaining the RAS IP address and password

1. Access the ART web site on your laptop.
2. From the User menu, select Administer an S8x00, G250, CCS, CVLAN, or ASG
Guard II.
The Enter Network Password dialog box appears.
3. Enter your ART user name and password.
4. Click OK.
The Start of Installation script & IP Addr Admin screen appears.
5. In the FL Number field, enter the customer's FL number.
6. In the Session Type field, select Installation Script Administration.
20 Installing and Upgrading the Avaya G250 Media Gateway
on page 21). ART is available only to Avaya associates.
Obtain the Electronic