CLI Commands
show next-hop
Use the show next-hop command to show the next-hop entries in the current list.
Syntax
show next-hop
User Level
read-only
Context
ip next-hop-list
Example
To show the next-hop entries in the current list:
G450-001(super-next hop list 1)#show next-hop
List index: 1
List name:
Index
Interface
-----
---------------- -------------- ------
1
Vlan 78
2
Tunnel 7
Related Commands
next-hop-interface,
ip pbr-group
Use the ip pbr-group command to apply the specified PBR list to the current interface. The
PBR list is applied to ingress packets only. Use the no form of the command to disable the
specified PBR list.
Syntax
[no] ip pbr-group list_number
766 Avaya G450 CLI Reference
NH1
Next-Hop
149.49.78.9
7.0.0.2
next-hop-ip
Status
Track
Track-Status
-----
------------
up
1
up
N/A
Policy-based routing
up
N/A