Section 26 Electrical Characteristics; Absolute Maximum Ratings; Table 26.1 Absolute Maximum Ratings - Renesas H8S Series Hardware Manual

Section 26 Electrical Characteristics

26.1

Absolute Maximum Ratings

Table 26.1 lists the absolute maximum ratings.

Table 26.1 Absolute Maximum Ratings

Item
Power supply voltage*
Input voltage (except port 7, A, G, P97,
P86, P52, and P42)
Input voltage (port A, G, P97, P86, P52,
and P42)
Input voltage (port 7)
Reference power supply voltage
Analog power supply voltage
Analog input voltage
Operating temperature
Operating temperature (when flash
memory is programmed or erased)
Storage temperature
Caution: Permanent damage to this LSI may result if absolute maximum ratings are exceeded.
Make sure the applied power supply does not exceed 4.3V.
Note: Voltage applied to the VCC pin.
*
The VCL pin should not be applied a voltage.
Symbol Value
V –0.3 to +4.3
CC
V –0.3 to V
in
V –0.3 to +7.0
in
V –0.3 to AV
in
AVref –0.3 to AV
AV –0.3 to +4.3
CC
V –0.3 to AV
AN
T –20 to +75
opr
T –20 to +75
opr
T –55 to +125
stg
Section 26 Electrical Characteristics
+0.3
CC
+0.3
CC
+0.3
CC
+0.3
CC
Rev. 3.00 Jul. 14, 2005 Page 947 of 986
REJ09B0098-0300
Unit
V
°C