Neighbor Remove-Private-As - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor remove-private-as

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
Syntax
remove-private-as
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Removes private AS numbers in updates sent to external peers. Private AS numbers
Description
are only in the range 64,512–65,535. The no version halts removing private AS
numbers. The default version removes the explicit configuration from the peer or
peer group and reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
58
neighbor remove-private-as
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.