Neighbor Prefix-List - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor prefix-list

neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
Syntax
prefixListName { in | out }
no neighbor { ipAddress | ipv6Address | peerGroupName } prefix-list
[ prefixListName ] { in | out }
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Assigns an inbound or outbound prefix list. The no version removes the prefix list.
Description
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
prefixListName Name of a BGP prefix list
in Assigns prefix list to incoming routes (inbound policy)
out Assigns prefix list to outgoing routes (outbound policy); you cannot configure
a member of a peer group to override the inherited peer group characteristic for
outbound policy
Chapter 2: N Commands
55
neighbor prefix-list