Neighbor Passive - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor passive

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } passive
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Configures the BGP speaker so that it only accepts inbound connections from, but
Description
does not initiate outbound connections to, the peer or peer group. The no version
permits the initiation of outbound connections. The default version removes the
explicit configuration from the peer or peer group and reestablishes inheritance of
the feature configuration.
Options
Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
Chapter 2: N Commands
51
neighbor passive