Neighbor Next-Hop-Unchanged - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor next-hop-unchanged

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
Syntax
next-hop-unchanged
Command introduced in JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Configures BGP to not modify the next hop sent to the BGP peer. Outbound route
Description
maps take precedence over this command, enabling prefixes that match the route
map to be modified, regardless of this command. The no version reenables BGP to
modify the next hop. The default version removes the explicit configuration from
the peer or peer group and reestablishes inheritance of the feature configuration.
Options
Address Family Configuration
Mode
50
neighbor next-hop-unchanged
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.