Neighbor Maximum-Update-Size - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor maximum-update-size

neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size value
Syntax
no neighbor { ipAddress | ipv6Address | peerGroupName } maximum-update-size
[ value ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Sets the maximum size of update messages transmitted to a BGP peer. The no version
Description
removes the maximum update size limitation.
Options
Address Family Configuration, Router Configuration
Mode
48
neighbor maximum-update-size
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of the BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
value Maximum update size in octets in the range 256–4096; default value is
1024