Neighbor Maximum-Orf-Entries - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor maximum-orf-entries

neighbor { ipAddress | ipv6Address } maximum-orf-entries maximum
Syntax
no neighbor { ipAddress | ipv6Address } maximum-orf-entries [ maximum ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Sets the maximum number of ORF entries of a particular type that are accepted from
Description
the specified neighbor. The no version restores the default value of no limits.
Options
Address Family Configuration, Router Configuration
Mode
46
neighbor maximum-orf-entries
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
maximum Maximum number of ORF entries in the range 0–4294967295;
default value is no limit