Neighbor Lenient - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor lenient

[ no ] neighbor { ipAddress | ipv6Address | peerGroupName } lenient
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Enables lenient behavior to make the BGP speaker more tolerant of malformed packet
Description
and finite state machine errors generated by peer, so that the speaker can attempt
recovery from the error and avoid bringing down the session. The no version disables
lenient behavior; this is the default condition.
Options
Address Family Configuration, Router Configuration
Mode
44
neighbor lenient
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.