Neighbor Default-Originate - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor default-originate

neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
Syntax
[ route-map mapTag ]
{ no | default } neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
[ route-map [ mapTag ] ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Allows a BGP speaker (the local router) to send the default route 0.0.0.0/0 to a
Description
neighbor for use as a default route. When you issue this command in the route-target
address family, BGP advertises the Default-RT-MEM-NLRI route (0:0:0/0). The no
version halts sending a default route to the neighbor. The default version removes
the explicit configuration from the peer or peer group and reestablishes inheritance
of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.
mapTag Name of route map applied to modify the attributes of the default route
or to filter the default route; string of up to 32 characters
Chapter 2: N Commands
neighbor default-originate
35