Neighbor As-Override - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor as-override

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } as-override
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Prevents routing loops between routers within a VPN by substituting the current
Description
router's AS number in routing tables for that of the neighboring router. The no version
halts this substitution. The default version removes the explicit configuration from
the peer or peer group and reestablishes inheritance of the feature configuration.
Options
Router Configuration
Mode
30
neighbor as-override
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.