Radius Nas-Port-Format Extended - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

For e series broadband service routers
Table of Contents

Advertisement

JUNOSe 11.1.x Command Reference Guide N to Z

radius nas-port-format extended

For ATM interfaces:
Syntax
radius nas-port-format extended atm [ field-widths [ slot slotWidth ]
[ adapter adapterWidth ] [ port portWidth ] [ vpi vpiWidth ] [ vci vciWidth ] ]
no radius nas-port-format extended atm
For Gigabit and 10-Gigabit Ethernet interfaces:
radius nas-port-format extended ethernet [ field-widths [ slot slotWidth ]
[ adapter adapterWidth ] [ port portWidth ] [ svlan svlanWidth ] [ vlan vlanWidth ] ]
no radius nas-port-format extended ethernet
Command introduced in JUNOSe Release 7.1.0.
Release Information
Configures the RADIUS client's use of an extended format for RADIUS attribute 5,
Description
NAS-Port, on ATM, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces on the E120
router and the E320 router. If you do not set the extended format for E120 or E320
routers, the RADIUS client uses the default format set through the radius
nas-port-format command, which does not accommodate the number of bits required
by the slot/adapter/port interface specifier on E120 and E320 routers. Issuing this
command enables you to encode the interface information in the attribute by
specifying the number of bits available for each field in the interface specifier. The
no version removes the format.
Options
Global Configuration
Mode
330
radius nas-port-format extended
field-widths Configures the width of the fields in the NAS-Port attribute
slotWidth Number of bits for the slot field
adapterWidth Number of bits for the adapter field
portWidth Number of bits for the port field
vpiWidth Number of bits for the VPI subinterface field on ATM interfaces
vciWidth Number of bits for the VCI subinterface field on ATM interfaces
svlanWidth Number of bits for the S-VLAN subinterface field on Gigabit Ethernet
and 10-Gigabit Ethernet interfaces
vlanWidth Number of bits for the VLAN subinterface field on Gigabit Ethernet
and 10-Gigabit Ethernet interfaces

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.1.x

Table of Contents