Radius Icr-Partition-Accounting - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

radius icr-partition-accounting

radius icr-partition-accounting { enable | disable }
Syntax
no radius icr-partition-accounting
Command introduced in JUNOSe Release 10.3.0.
Release Information
Enables or disables sending of the ICR Partition-Accounting-On or
Description
Partition-Accounting-Off messages to the RADIUS servers. The no version restores
the default value, disable.
Options
Global Configuration
Mode
enable Configures the RADIUS client to enable the use of
Partition-Accounting-On and Partition-Accounting-Off messages. When this option
is used, these messages are sent to the accounting server configured on the
virtual router.
disable Configures the RADIUS client to disable the use of
Partition-Accounting-On and Partition-Accounting-Off messages; this is the default
setting. When this option is used, the Partition-Accounting messages are not sent
to the accounting server configured on the virtual router.
Chapter 6: R Commands
radius icr-partition-accounting
319