Radius Acct-Session-Id-Format - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

radius acct-session-id-format

radius acct-session-id-format { decimal | description }
Syntax
no radius acct-session-id-format
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the RADIUS client's use of a specific format for RADIUS attribute 44,
Description
Acct-Session-Id. The no version negates the Acct-Session-Id format.
Options
Global Configuration
Mode
decimal Configures the RADIUS client to use a decimal format
description Configures the RADIUS client to use the generic format:
erx interfaceType interfaceSpecifier:hexNumber
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
hexNumber Hexadecimal number identifying the session
Chapter 6: R Commands
radius acct-session-id-format
307