Clear Egress-Queue - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Hide thumbs Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
Table of Contents

Advertisement

clear egress-queue

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear egress-queue interfaceType interfaceSpecifier [ explicit ]
[ traffic-class trafficClassName ]
Command introduced before JunosE Release 7.1.0.
Clears egress queue statistics for the all queues bound to the specified interface for
queues stacked at and above the interface, or only for the specified traffic class. There
is no no version.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
explicit—Clears queues only on the specified interface and not queues stacked above
the interface
trafficClassName—Name of a traffic class for which egress queue statistics are cleared
Privileged Exec
Chapter 4: C Commands
371

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents