JUNOSe 11.1.x Command Reference Guide N to Z
qos-adaptive-mode
[ no ] qos-adaptive-mode
Syntax
Command introduced in JUNOSe Release 7.2.0.
Release Information
Enables ANCP to dynamically create QoS parameter instances associated with the
Description
ANCP downstream rate application. ANCP also determines the value the system uses
when recalculating the QoS shaping rate. The values of the parameter instances track
the bandwidth of the local loop that is communicated by ANCP. The no version
disables QoS adaptive mode.
Layer 2 Control Configuration
Mode
288
qos-adaptive-mode