Ipsec Key Manual Pre-Share - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipsec key manual pre-share

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ipsec key manual pre-share { ipAddress | ip address ipAddress | identity fqdn |
local-ip-address localIpAddress [ remote-ip-address remoteIpAddress ] }
Command introduced before JunosE Release 7.1.0.
local-ip-address and remote-ip-address keywords added in JunosE Release 7.3.0.
localIpAddress and remoteIpAddress variables added in JunosE Release 7.3.0.
Specifies a preshared key for a remote peer, indexed by remote IP or remote identity. It
can also specify a preshared key which is indexed by the local ip / remote IP pair for use
in specific pairings or in group preshared keys (remote is wildcard 0.0.0.0).
Manually configured keys are used during the tunnel establishment phase when the
ISAKMP/IKE policy specifies preshared key authentication.
You can identify the remote peer by either IP address or fully qualified domain name
(FQDN). The no version deletes a preshared key.
NOTE: You must enter this command in the virtual router context where the
IP address or FQDN of the peer is defined.
ipAddress—Address of the peer for which the key can be used
fqdn—Fully qualified domain name of the peer for which the key can be used; a
maximum of 80 characters
localIpAddress—Address of the local peer for which the key can be used
remoteIpAddress—Address of the remote peer for which the key can be used
Global Configuration
Chapter 10: I Commands
997