Path Ds3 T1 Framing - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

path ds3 t1 framing

path pathChannel ds3 ds3Channel t1 t1Channel framing framingType
Syntax
no path pathChannel ds3 ds3Channel t1 t1Channel framing
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the framing format for a T1 channel on a DS3 signal. This command
Description
applies to a T1 channel on a DS3 over channelized SONET interface. The no version
restores the default value.
Options
Controller Configuration
Mode
pathChannel Number, in the range 1–2147483648, that identifies the path
ds3Channel Number, in the range 1–3, that identifies the DS3 channel
t1Channel One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
framingType One of the following types:
esf Default; specifies extended superframe
sf Specifies superframe
Chapter 4: P Commands
171
path ds3 t1 framing