Path Ds1|E1 - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

path ds1|e1

path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]
Syntax
[ no ] path pathChannel { ds1 | e1 } tributaryIdentifier [ tributaryType ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Creates and configures SONET and SDH tributaries. The no version deletes a tributary.
Description
Options
Controller Configuration
Mode
pathChannel Number, in the range 1–2147483648, that identifies the path
tributaryIdentifier Specifier for the tributary in the format
pathChannel { ds1 | e1 } pathPayload/tributaryGroup/tributaryNumber
pathPayload Payload number for the path; value is 1 for SONET and in the
range 1–3 for SDH
tributaryGroup Number, in the range 1–7, that identifies the group within
the path
tributaryNumber Number of the tributary within the tributary group; the
value is in the range 1–4 if the tributary type is vt15 or tu11 and in the range
1–3 if the tributary type is tu12
tributaryType Virtual tributary type
vt15 Default for SONET DS1 tributaries
tu11 Default for SDH DS1 tributaries
tu12 Default for SDH E1 tributaries
Chapter 4: P Commands
133
path ds1|e1