Ntp Broadcast - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

ntp broadcast

[ no ] ntp broadcast [ version number ] [ pollInterval ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables NTP broadcast server on a server interface to transmit NTP broadcast packets
Description
periodically. You can enable up to 100 NTP broadcast server interfaces. The no
version prevents the interface from sending NTP broadcast packets.
Options
Interface Configuration
Mode
98
ntp broadcast
number Integer in the range 1–4; indicates the version of the NTP software on
the NTP broadcast server; default value is 3
pollInterval Integer in the range 4–17; specifies the poll interval in seconds (as
a power of 2) for broadcasting NTP messages; default value is 6 (64 seconds)