Nsf Interface Wait - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

nsf interface wait

[ no ] nsf interface wait [ seconds ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the maximum amount of time, in seconds, that an IS-IS process on a
Description
restarting router waits for all interfaces with IS-IS adjacencies to come up before
completing the restart process. The no version restores the default maximum wait
time, 10 seconds.
Options
Router Configuration
Mode
seconds Maximum wait time, in the range 5–120 seconds, before the IS-IS
restart process is completed; default value is 10 seconds
Chapter 2: N Commands
93
nsf interface wait