Next-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

next-interface

[ no ] [ suspend ] next-interface interfaceType interfaceSpecifier
Syntax
[ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines an output interface for an IP policy list. When the interfaceType is a broadcast
Description
medium, specify a next hop using the next-hop command. The no version removes
a next interface rule from a policy list; the suspend keyword temporarily suspends
the rule; the no suspend version resumes application of a suspended rule. For IP
interfaces, this command is supported only on input policies.
NOTE: The next-interface command has been replaced by the forward interface
command and may be removed completely in a future release.
The SRP module Fast Ethernet port cannot be the destination of the next-interface
command.
Options
Classifier Group Configuration, Policy List Configuration
Mode
Related Topics
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
nextHop Next-hop IP address
claclName In Policy List Configuration, specifies the classifier control list used
to classify packets for this next-hop policy. If you do not specify a classifier group,
the router selects all packets from the interface associated with this policy list
for this rule.
precValue In Policy List Configuration, specifies the precedence of this rule in
relation to other rules within this set
Policy Rule Precedence
Chapter 2: N Commands
79
next-interface