Next-Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

next-address

next-address ipAddress [ [ mask ] ipMask ] [ loose ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures an IPv4 hop at the end of the MPLS explicit path. There is no no version.
Description
Options
Explicit Path Configuration
Mode
ipAddress Address of the node
ipMask [not currently used] Mask for the next adjacent address
loose Indicates that the node is not necessarily directly connected (adjacent)
to the previous node in the path. If loose is not configured, the configuration
defaults to strict. Strict indicates that the node is directly connected to the previous
node.
Chapter 2: N Commands
77
next-address