JUNOSe 11.1.x Command Reference Guide N to Z
neighbor soft-reconfiguration inbound
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
Syntax
soft-reconfiguration inbound
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Initiates storage of unmodified copies of routes from the specified neighbor or all
Description
members of the specified peer group. The no version halts this storage. The default
version removes the explicit configuration from the peer or peer group and
reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
66
neighbor soft-reconfiguration inbound
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.